Filter
Top Products
DescriptionName
Click this link if you want to create a network control policy.Create Network Control Policy
Policy link
e) Click OK.
Step 7
If you chose the expert LAN connectivity option and are configuring this service profile for iSCSI boot, do
the following:
a) Click the down arrows to expand the iSCSI vNICs bar.
b) Click Add on the icon bar of the table to open the Create iSCSI vNIC dialog box.
c) Complete the following fields to specify the identity information for the iSCSI vNIC:
DescriptionName
The name of the iSCSI vNIC.
This name can be between 1 and 16 alphanumeric characters. You
cannot use spaces or any special characters other than - (hyphen), _
(underscore), : (colon), and . (period), and you cannot change this
name after the object has been saved.
Name field
The LAN vNIC associated with this iSCSI vNIC, if any.Overlay vNIC drop-down list
The iSCSI adapter policy associated with this iSCSI vNIC, if any.iSCSI Adapter Policy drop-down
list
Click this link to create a new iSCSI adapter policy that will be
available to all iSCSI vNICs.
Create iSCSI Adapter Policy
link
The MAC address associated with this iSCSI vNIC, if any. If the
MAC address is not set, Cisco UCS Manager GUI displays Derived.
MAC Address field
The MAC pool associated with this iSCSI vNIC, if any.MAC Pool field
The virtual LAN associated with this iSCSI vNIC. The default VLAN
is default.
For the Cisco UCS M81KR Virtual Interface Card and the
Cisco UCS M82-8P Virtual Interface Card, the VLAN that
you specify must be the same as the native VLAN on the
overlay vNIC.
For the Cisco UCS M51KR-B Broadcom BCM57711
adapter, the VLAN that you specify can be any VLAN
assigned to the overlay vNIC.
Note
VLAN drop-down list
d) Click OK.
Cisco UCS Manager GUI Configuration Guide, Release 2.0
OL-25712-04 529
Working with Service Profile Templates