Filter
Top Products
Procedure
Step 1
In the Navigation pane, click the Equipment tab.
Step 2
On the Equipment tab, expand Equipment > Fabric Interconnects > Fabric_Interconnect_Name.
Step 3
Depending upon the location of the ports you want to configure, expand one of the following:
• Fixed Module
• Expansion Module
Step 4
Click one or more of the ports under the Unconfigured Ethernet Ports node.
If you want to reconfigure a server port, uplink Ethernet port, or FCoE storage port, expand the appropriate
node.
Step 5
Right-click the selected port or ports and choose Configure as Appliance Port.
Step 6
If the Cisco UCS Manager GUI displays a confirmation dialog box, click Yes.
Step 7
In the Configure as Appliance Port dialog box, complete the following fields:
DescriptionName
The quality of service setting associated with this interface. This can
be one of the following:
• Fc—Use this priority for vHBA traffic only.
• Platinum—Use this priority for vNIC traffic only.
• Gold—Use this priority for vNIC traffic only.
• Silver—Use this priority for vNIC traffic only.
• Bronze—Use this priority for vNIC traffic only.
• Best Effort—Do not use this priority. It is reserved for the Basic
Ethernet traffic lane.
Priority drop-down list
The LAN pin group that you want to use as the appliance pin target to
the specified fabric and port, or fabric and port channel.
Pin Group drop-down list
Click this link if you want to create a LAN pin group.Create LAN Pin Group link
The network control policy associated with this port.Network Control Policy
drop-down list
Click this link if you want to create a LAN pin group.Create Network Control Policy
link
Cisco UCS Manager GUI Configuration Guide, Release 2.0
90 OL-25712-04
Appliance Ports