Filter
Top Products
For more information about how to create an IPMI profile, see Creating an IPMI Access Profile, on page 405.
Step 4
To add a Serial over LAN policy to the service profile, do one of the following:
• To add an existing policy, select the desired Serial over LAN policy from the SoL Configuration Profile
drop-down list.
• To create a Serial over LAN policy that is only available to service profile created from this template,
select Create a Specific SoL Policy from the SoL Configuration Profile drop-down list and complete
the Admin State field and the Speed drop-down list.
• To create a Serial over LAN policy that is available to all service profile templates, click the Create
Serial over LAN Policy link, complete the fields in the dialog box, and then select that policy from the
SoL Configuration Profile drop-down list.
For more information about how to create a serial over LAN policy, see Creating a Serial over LAN Policy,
on page 415.
Step 5
To configure the management IP required for external accessto the CIMC on the server, click the down arrows
to expand the Management IP Address bar and do the following:
a) Click one of the following radio buttons:
• None—No management IP address is assigned to the service profile. The management IP address
is set based on the CIMC management IP address settings on the server.
• Static—A static management IP address is assigned to the service profile, based on the information
entered in this area.
• Pooled—A management IP address is assigned to the service profile from the management IP address
pool.
b) If you selected static, complete the following fields:
DescriptionField
The static IPv4 address to be assigned to the service
profile
IP Address
The subnet mask for the IP address.Subnet Mask
The default gateway that the IP address should use.Default Gateway
Step 6
To monitor thresholds and collect statistics for the associated server, click the down arrows to expand the
Monitoring Configuration (Thresholds) bar and do one of the following:
• To add an existing policy, select the desired threshold policy from the Threshold Policy drop-down
list.
• To create a threshold policy that is available to all service profiles, click the Create Threshold Policy
link, complete the fields in the dialog box, and then select that policy from the Threshold Policy
drop-down list.
For more information about how to create a threshold policy, see Creating a Server and Server Component
Threshold Policy , on page 666.
Cisco UCS Manager GUI Configuration Guide, Release 2.0
512 OL-25712-04
Creating Service Profiles