Filter
Top Products
• To remove ports, choose one or more ports in the Ports in the port channel table, and then click the
<< button to remove the ports from the port channel and add them to the Ports table.
Step 7
Click OK.
Deleting an Appliance Port Channel
Procedure
Step 1
In the Navigation pane, click the LAN tab.
Step 2
On the LAN tab, expand LAN > Appliances.
Step 3
Expand the node for the fabric interconnect that includes the port channel you want to enable.
Step 4
Expand the Port Channels node.
Step 5
Right-click the port channel you want to enable and choose Disable Port Channel.
Step 6
If the Cisco UCS Manager GUI displays a confirmation dialog box, click Yes.
Fibre Channel Port Channels
A Fibre Channel port channel allows you to group several physical Fibre Channel ports (link aggregation) to
create one logical Fibre Channel link to provide fault-tolerance and high-speed connectivity. In Cisco UCS
Manager, you create a port channel first and then add Fibre Channel ports to the port channel.
You can create up to four Fibre Channel port channels in each Cisco UCS domain. Each Fibre Channel port
channel can include a maximum of 16 uplink Fibre Channel ports.
Creating a Fibre Channel Port Channel
Procedure
Step 1
In the Navigation pane, click the SAN tab.
Step 2
On the SAN tab, expand SAN > SAN Cloud.
Step 3
Expand the node for the fabric where you want to create the port channel.
Step 4
Right-click the FC Port Channels node and choose Create Port Channel.
Step 5
In the Set Port Channel Name page of the Create Port Channel wizard, do the following:
a) Complete the following fields:
Cisco UCS Manager GUI Configuration Guide, Release 2.0
104 OL-25712-04
Fibre Channel Port Channels