Filter
Top Products
Deleting an SNMPv3 User
Procedure
Step 1
In the Navigation pane, click the Admin tab.
Step 2
On the Admin tab, expand All > Communication Management > Communication Services.
Step 3
Select the Communication Services tab.
Step 4
In the SNMP Users area, click the row in the table that corresponds to the user you want to delete.
Step 5
Click the Delete icon to the right of the table.
Step 6
If the Cisco UCS Manager GUI displays a confirmation dialog box, click Yes.
Step 7
Click Save Changes.
Enabling Telnet
Procedure
Step 1
In the Navigation pane, click the Admin tab.
Step 2
On the Admin tab, expand All > Communication Management > Communication Services.
Step 3
Click the Communication Services tab.
Step 4
In the Telnet area, click the enabled radio button.
Step 5
Click Save Changes.
Disabling Communication Services
We recommend that you disable all communication services that are not required to interface with other
network applications.
Note
Procedure
Step 1
In the Navigation pane, click the Admin tab.
Step 2
On the Admin tab, expand All > Communication Management > Communication Services.
Step 3
On the Communication Services tab, click the disable radio button for each service that you want to disable.
Step 4
Click Save Changes.
Cisco UCS Manager GUI Configuration Guide, Release 2.0
OL-25712-04 129
Enabling Telnet