Filter
Top Products
DescriptionName
The default gateway associated with the IPv4 address.Default Gateway field
The primary DNS server address.Primary DNS field
The secondary DNS server address.Secondary DNS field
Step 13
For the iSCSI target interface, choose one of the following radio buttons:
DescriptionOption
The system creates a static target interface that you need to configure.
Proceed to Step 14.
iSCSI Static Target Interface
The system creates an auto target interface. You need to specify whether
the auto target uses an initiator or a DCHP vendor ID.
Proceed to Step 15.
iSCSI Auto Target Interface
Step 14
If you chose iSCSI Static Target Interface, do one of the following in the Static Target Interface table:
• To add an iSCSI static target interface, click Add or to modify an iSCSI target interface, select the iSCSI
target interface that you want to change and click Modify. Then and complete or change the following
fields in the Create iSCSI Static Target dialog box:
DescriptionName
A regular expression that defines the iSCSI Qualified Name (IQN)
or Extended Unique Identifier (EUI) name of the iSCSI target.
You can enter any alphanumeric characters as well as the following
special characters:
• . (period)
• : (colon)
• - (dash)
This name must be properly formatted using standard
IQN or EUI guidelines.
Important
The following examples show properly formatted iSCSI target
names:
• iqn.2001-04.com.example
• iqn.2001-04.com.example:storage:diskarrays-sn-a8675309
• iqn.2001-04.com.example:storage.tape1.sys1.xyz
• iqn.2001-04.com.example:storage.disk2.sys1.xyz
• eui.02004567A425678D
iSCSI Target Name field
Cisco UCS Manager GUI Configuration Guide, Release 2.0
460 OL-25712-04
iSCSI Boot