Filter
Top Products
Procedure
Step 1
In the Navigation pane, click the Admin tab.
Step 2
On the Admin tab, expand All > User Management > LDAP.
Step 3
Expand LDAP Provider Groups.
Step 4
Right-click the LDAP provider group you want to delete and choose Delete.
Step 5
If the Cisco UCS Manager GUI displays a confirmation dialog box, click Yes.
Creating a RADIUS Provider Group
Creating a RADIUS provider group allows you to authenticate using multiple RADIUS databases.
Authenticating with a single RADIUS database does not require you to set up a RADIUS provider group.Note
Before You Begin
Create one or more RADIUS providers.
Procedure
Step 1
In the Navigation pane, click the Admin tab.
Step 2
On the Admin tab, expand All > User Management > RADIUS.
Step 3
Right-click RADIUS Provider Groups and choose Create RADIUS Provider Group.
Step 4
In the Create RADIUS Provider Group dialog box, do the following:
a) In the Name field, enter a unique name for the group.
This name can be between 1 and 127 ASCII characters.
b) In the RADIUS Providers table, choose one or more providers to include in the group.
c) Click the >> button to add the providers to the Included Providers table.
You can use the << button to remove providers from the group.
d) After you have added all desired providers to the provider group, click OK.
What to Do Next
Configure an authentication domain or select a default authentication service.
Deleting a RADIUS Provider Group
You cannot delete a provider group if it is being used by an authentication configuration.
Cisco UCS Manager GUI Configuration Guide, Release 2.0
148 OL-25712-04
Configuring Multiple Authentication Systems