Filter
Top Products
DescriptionName
What happens when the server encounters a critical error during
POST. This can be one of the following:
• disabled—The BIOS continues to attempt to boot the
server.
• enabled—The BIOS pauses the attempt to boot the server
and opens the Error Manager when a critical error occurs
during POST.
• Platform Default—The BIOS uses the value for this
attribute contained in the BIOS defaults for the server type
and vendor.
Post Error Pause
How the server behaves when power is restored after an
unexpected power loss. This can be one of the following:
• stay-off—The server remains off until manually powered
on.
• last-state—The server is powered on and the system
attempts to restore its last state.
• reset—The server is powered on and automatically reset.
• Platform Default—The BIOS uses the value for this
attribute contained in the BIOS defaults for the server type
and vendor.
Resume Ac On Power Loss
Whether the power and reset buttons on the front panel are
ignored by the server. This can be one of the following:
• disabled—The power and reset buttons on the front panel
are active and can be used to affect the server.
• enabled—The power and reset buttons are locked out.
The server can only be reset or powered on or off from
the CIMC GUI.
• Platform Default—The BIOS uses the value for this
attribute contained in the BIOS defaults for the server type
and vendor.
Front Panel Lockout
Cisco UCS Manager GUI Configuration Guide, Release 2.0
OL-25712-04 383
Configuring BIOS Settings