Filter
Top Products
Deleting a vNIC/vHBA Placement Policy
Procedure
Step 1
In the Navigation pane, click the Servers tab.
Step 2
On the Servers tab, expand Servers > Policies > Organization_Name.
Step 3
Expand the vNIC/vHBA Placement Policies node.
Step 4
Right-click the policy you want to delete and choose Delete.
Step 5
If the Cisco UCS Manager GUI displays a confirmation dialog box, click Yes.
Explicitly Assigning a vNIC to a vCon
Before You Begin
Configure the vCons through a vNIC/vHBA placement policy or in the service profile with one of the following
values:
• Assigned Only
• Exclude Dynamic
• Exclude Unassigned
If a vCon is configured for All, you can still explicitly assign a vNIC or vHBA to that vCon. However, you
have less control with this configuration.
Procedure
Step 1
In the Navigation pane, click the Servers tab.
Step 2
On the Servers tab, expand Servers > Service Profiles.
Step 3
Expand the node for the organization which contains the service profile whose vNICs you want to explicitly
assign to a vCon.
If the system does not include multitenancy, expand the root node.
Step 4
Expand Service_Profile_Name > vNICs.
Step 5
Click on the vNIC that you want to explicitly assign to a vCon.
Step 6
In the Work pane, click the General tab.
Step 7
In the Virtual Host Interface Placement section, complete the following fields:
Cisco UCS Manager GUI Configuration Guide, Release 2.0
434 OL-25712-04
Configuring vNIC/vHBA Placement Policies