Filter
Top Products
Hybrid Display
For each chassis in a Cisco UCS domain, Cisco UCS Manager GUI provides a hybrid display that includes
both physical components and connections between the chassis and the fabric interconnects.
This tab displays detailed information about the connections between the selected chassis and the fabric
interconnects. It has an icon for the following:
• Each fabric interconnect in the system
• The I/O module (IOM) in the selected component, which is shown as an independent unit to make the
connection paths easier to see
• The selected chassis showing the servers and PSUs
The lines between the icons represent the connections between the following:
• DCE interface on each server and the associated server port on the IOM. These connections are created
by Cisco and cannot be changed.
• Server port on the IOM and the associated port on the fabric interconnect. You can change these
connections if desired.
You can mouse over the icons and lines to view tooltips identifying each component or connection, and you
can double-click any component to view properties for that component.
If there is a fault associated with the component or any of its subcomponents, Cisco UCS Manager GUI
displays a fault icon on top of the appropriate component. If there are multiple fault messages, Cisco UCS
Manager GUI displays the icon associated with the most serious fault message in the system.
Logging in to Cisco UCS Manager GUI through HTTPS
The default HTTPS web link for Cisco UCS Manager GUI is https://UCSManager_IP, where
UCSManager_IP represents the IP address assigned to Cisco UCS Manager. This IP address can be one of
the following:
• Cluster configuration: UCSManager_IP represents the virtual or cluster IP address assigned to Cisco
UCS Manager. Do not use the IP addresses assigned to the management port on the fabric interconnects.
• Standalone configuration: UCSManager_IP represents the IP address for the management port on the
fabric interconnect.
Procedure
Step 1
In your web browser, type the Cisco UCS Manager GUI web link or select the bookmark in your browser.
Step 2
If a Security Alert dialog box appears, click Yes to accept the security certificate and continue.
Step 3
In the Cisco UCS Manager launch page, click Launch UCS Manager.
Depending upon the web browser you use to log in, you may be prompted to download or save the .JNLP
file.
Step 4
If Cisco UCS Manager displays a pre-login banner, review the message and click OK to close the dialog box.
Step 5
If a Security dialog box displays, do the following:
Cisco UCS Manager GUI Configuration Guide, Release 2.0
OL-25712-04 53
Logging in to Cisco UCS Manager GUI through HTTPS