Filter
Top Products
• Major
• Minor
• Warning
• Condition
• Info
e) In the Up and Down fields, enter the range of values that should trigger the alarm.
f) In the Alarm Triggers (Below Normal Value) field, check one or more of the following check boxes:
• Info
• Condition
• Warning
• Minor
• Major
• Critical
g) In the Up and Down fields, enter the range of values that should trigger the alarm.
h) Click Finish Stage.
i) Do one of the following:
• To define another threshold property for the class, repeat Step 6.
• If you have defined all required properties for the class, click Finish Stage.
Step 7
In the Choose Statistics Class page of the Create Threshold Class wizard, do one the following:
• To configure another threshold class for the policy, repeat Steps 5 and 6.
• If you have configured all required threshold classes for the policy, click Finish.
Step 8
Click OK.
Deleting a Server and Server Component Threshold Policy
Procedure
Step 1
In the Navigation pane, click the Servers tab.
Step 2
On the Servers tab, expand Servers > Policies > Organization_Name.
Step 3
Expand the Threshold Policies node.
Step 4
Right-click the policy you want to delete and select Delete.
Step 5
If the Cisco UCS Manager GUI displays a confirmation dialog box, click Yes.
Cisco UCS Manager GUI Configuration Guide, Release 2.0
OL-25712-04 669
Configuring Statistics Threshold Policies