Filter
Top Products
DescriptionName
If Type is set to san, this area contains the following fields:
• vHBA—The vHBA used to access the SAN boot image
• LUN—The LUN that corresponds to the location of the boot image
• WWN—The WWN that corresponds to the location of the boot
image
SAN area
If Type is set to lan, this area contains the vNIC drop-down list from
which you can choose the vNIC from which the server should boot.
Network (PXE) area
Secondary Boot Device Section
Check this check box if you want to set a second boot device for this
service profile. If you check this box, Cisco UCS Manager GUI displays
the rest of the fields in this section.
Secondary Boot Device check box
This can be one of the following:
• local-disk—The server boots from its local disk.
• san—The server boots from an image stored in a SAN. If you
select this option, Cisco UCS Manager GUI displays the SAN
area.
• Lan—The server boots from the LAN. If you select this option,
Cisco UCS Manager GUI displays the Network area that lets you
specify which vNIC the server should use for the PXE boot.
• CD-ROM—The server boots from a virtual CD-ROM.
• Floppy—The server boots from a virtual floppy.
Type field
If Type is set to san, this area contains the following field:
• vHBA—The vHBA used to access the SAN boot image
• LUN—The LUN that corresponds to the location of the boot image
• WWN—The WWN that corresponds to the location of the boot
image
SAN area
If Type is set to Lan, this area contains the vNIC drop-down list from
which you can choose the vNIC from which the server should boot.
Network (PXE) area
Step 9
(Optional) In the Select column of the Server Association (optional) area, click the radio button for a server
to associate this service profile with that server.
Step 10
Click OK.
Cisco UCS Manager GUI Configuration Guide, Release 2.0
516 OL-25712-04
Creating Service Profiles