Filter
Top Products
DescriptionName
Whether this VLAN is subdivided into private or secondary VLANs.
This can be one of the following:
• None—This VLAN does not have any secondary or private
VLANs.
• Primary—This VLAN can have one or more secondary VLANs,
as shown in the Secondary VLANs area.
• Isolated—This is a private VLAN. The primary VLAN with which
it is associated is shown in the Primary VLAN drop-down list.
Sharing Type field
If the Sharing Type field is set to Isolated, this is the primary VLAN
associated with this private VLAN.
Primary VLAN drop-down list
Click this button to determine whether the VLAN ID overlaps with any
other IDs on the system.
Check Overlap button
Step 7
Repeat Steps 6 and 7 to create additional VLANs.
What to Do Next
Assign ports and port channels to the VLANs.
Assigning Ports and Port Channels to VLANs
Procedure
Step 1
In the Navigation pane, click the LAN tab.
Step 2
On the LAN tab, click the LAN node.
Step 3
In the Work pane, click the LAN Uplinks Manager link on the LAN Uplinks tab.
The LAN Uplinks Manager opens in a separate window.
Step 4
In the LAN Uplinks Manager, click VLANs > VLAN Manager.
Step 5
Click one of the following subtabs to configure ports and port channels on that fabric interconnect:
DescriptionSubtab
Displays the ports, port channels, and VLANs that are accessible to fabric
interconnect A.
Fabric A
Cisco UCS Manager GUI Configuration Guide, Release 2.0
OL-25712-04 327
Assigning Ports and Port Channels to VLANs