Filter
Top Products
b) Complete the following fields to specify the fabric connection information:
DescriptionName
The fabric interconnect associated with the component.
If you want this vNIC to be able to access the second fabric
interconnect if the default one is unavailable, check the Enable
Failover check box.
Do not enable fabric failover for the vNIC under the
following circumstances:
Note
• If the Cisco UCS domain is running in Ethernet Switch
Mode. vNIC fabric failover is not supported in that
mode. If all Ethernet uplinks on one fabric interconnect
fail, the vNICs do not fail over to the other.
• if you plan to associate this vNIC with a server that
has an adapter which does not support fabric failover,
such as the Cisco UCS 82598KR-CI 10-Gigabit
Ethernet Adapter. If you do so, Cisco UCS Manager
generates a configuration fault when you associate the
service profile with the server.
Fabric ID field
This table lists the VLANs that can be associated withthis vNIC. The
columns are:
• Select—Check the check box in this column for each VLAN
you want to use.
• Name—The name of the VLAN.
• Native VLAN—To designate one of the VLANs as the native
VLAN, click the radio button in this column.
VLANs table
Click this link if you want to create a VLAN.Create VLAN link
The maximum transmission unit, or packet size, that this vNIC
accepts.
Enter an integer between 1500 and 9216.
If the vNIC has an associated QoS policy, the MTU specified
here must be equal to or less than the MTU specified in the
associated QoS system class. If this MTU value exceeds the
MTU value in the QoS system class, packets may be dropped
during data transmission.
Note
MTU field
Choose the LAN pin group you want associated with this vNIC.Pin Group drop-down list
Click this link if you want to create a LAN pin group.Create LAN Pin Group link
Operational Parameters Section
Cisco UCS Manager GUI Configuration Guide, Release 2.0
554 OL-25712-04
Managing Service Profiles