Filter
Top Products
Decommissioning a Chassis
Procedure
Step 1
In the Navigation pane, click the Equipment tab.
Step 2
On the Equipment tab, expand Equipment > Chassis.
Step 3
Choose the chassis that you want to decommission.
Step 4
In the Work pane, click the General tab.
Step 5
In the Actions area, click Decommission Chassis.
Step 6
If Cisco UCS Manager GUI displays a confirmation dialog box, click Yes.
The decommission may take several minutes to complete. After the chassis has been removed from the
configuration, Cisco UCS Manager adds the chassis to the Decommissioned tab.
Removing a Chassis
Before You Begin
Physically remove the chassis before performing the following procedure.
Procedure
Step 1
In the Navigation pane, click the Equipment tab.
Step 2
On the Equipment tab, expand Equipment > Chassis.
Step 3
Choose the chassis that you want to remove.
Step 4
In the Work pane, click the General tab.
Step 5
In the Actions area, click Remove Chassis.
Step 6
If Cisco UCS Manager displays a confirmation dialog box, click Yes.
The removal may take several minutes to complete.
Recommissioning a Single Chassis
This procedure returns the chassis to the configuration and applies the chassis discovery policy to the chassis.
After this procedure, you can access the chassis and any servers in it.
Cisco UCS Manager GUI Configuration Guide, Release 2.0
OL-25712-04 579
Decommissioning a Chassis