Filter
Top Products
DescriptionName
The name of the policy.
This name can be between 1 and 16 alphanumeric characters. You
cannot use spaces or any special characters other than - (hyphen), _
(underscore), : (colon), and . (period), and you cannot change this
name after the object has been saved.
Name field
A description of the policy. We recommend that you include
information about where and when the policy should be used.
Enter up to 256 characters. You can use any characters or spaces
except ^ (carat), \ (backslash), > (greater than), < (less than), ' (single
quote), " (double quote), ` (accent mark), or = (equal sign).
Description field
b) Click Next.
Step 6
In the Threshold Classes page of the Create Threshold Policy wizard, do the following:
a) Click Add.
b) In the Choose Statistics Class dialog box, choose the statistics class for which you want to configure a
custom threshold from the Stat Class drop-down list.
c) Click Next.
Step 7
In the Threshold Definitions page, do the following:
a) Click Add.
The Create Threshold Definition dialog box opens.
b) From the Property Type field, choose the threshold property that you want to define for the class.
c) In the Normal Value field, enter the desired value for the property type.
d) In the Alarm Triggers (Above Normal Value) fields, check one or more of the following check boxes:
• Critical
• Major
• Minor
• Warning
• Condition
• Info
e) In the Up and Down fields, enter the range of values that should trigger the alarm.
f) In the Alarm Triggers (Below Normal Value) fields, check one or more of the following check boxes:
• Info
• Condition
• Warning
• Minor
• Major
Cisco UCS Manager GUI Configuration Guide, Release 2.0
OL-25712-04 667
Configuring Statistics Threshold Policies