Filter
Top Products
What to Do Next
Ensure that Call Home is fully configured.
Configuring System Inventory Messages
Configuring System Inventory Messages
Procedure
Step 1
In the Navigation pane, click the Admin tab.
Step 2
On the Admin tab, expand All > Communication Management > Call Home.
Step 3
In the Work pane, click the System Inventory tab.
Step 4
In the Properties area, complete the following fields:
DescriptionName
If this field is set to On, Cisco UCS sends the system inventory to the
Call Home database. When the information is sent depends on the other
fields in this area.
Send Periodically field
The number of days that should pass between automatic system
inventory data collection.
Enter an integer between 1 and 30.
Send Interval field
The hour that the data should be sent using the 24-hour clock format.Hour of Day to Send field
The number of minutes after the hour that the data should be sent.Minute of Hour field
The date and time the information was last sent.
This field is displayed after the first inventory has been
sent.
Note
Time Last Sent field
The date and time for the upcoming data collection.
This field is displayed after the first inventory has been
sent.
Note
Next Scheduled field
Step 5
Click Save Changes.
Sending a System Inventory Message
Use this procedure if you need to manually send a system inventory message outside of the scheduled messages.
Cisco UCS Manager GUI Configuration Guide, Release 2.0
684 OL-25712-04
Configuring System Inventory Messages