Filter
Top Products
Procedure
Step 1
In the Navigation pane, click the LAN tab.
Step 2
On the LAN tab, click the LAN node.
Step 3
In the Work pane, click the VLANs tab.
Step 4
On the icon bar to the right of the table, click +.
If the + icon is disabled, click an entry in the table to enable it.
Step 5
In the Create VLANs dialog box, complete the following fields:
DescriptionName
For a single VLAN, this is the VLAN name. For a range of VLANs,
this is the prefix that the system uses for each VLAN name.
The VLAN name is case sensitive.
This name can be between 1 and 32 alphanumeric characters. You
cannot use spaces or any special characters other than - (hyphen), _
(underscore), : (colon), and . (period), and you cannot change this name
after the object has been saved.
VLAN Name/Prefix field
You can choose one of the following:
• Common/Global—The VLANs apply to both fabrics and use the
same configuration parameters in both cases
• Fabric A—The VLANs only apply to fabric A.
• Fabric B—The VLAN only apply to fabric B.
• Both Fabrics Configured Differently—The VLANs apply to
both fabrics but you can specify different VLAN IDs for each
fabric.
For upstream disjoint L2 networks, we recommend that you choose
Common/Global to create VLANs that apply to both fabrics.
Configuration options
Cisco UCS Manager GUI Configuration Guide, Release 2.0
OL-25712-04 281
Configuring Named VLANs