Filter
Top Products
Deleting a WWPN Initiator from a WWPN Pool
Procedure
Step 1
In the Navigation pane, click the SAN tab.
Step 2
In the SAN tab, expand SAN > Pools > Organization_Name .
Step 3
Expand the WWPN Pools node.
Step 4
Choose the WWPN pool from which you want to delete a WWPN initiator.
Step 5
In the Work pane, click the Initiators tab.
Step 6
Right-click the initiator that you want to delete and choose Delete.
Step 7
If the Cisco UCS Manager GUI displays a confirmation dialog box, click Yes.
Deleting a WWPN Pool
If you delete a pool, Cisco UCS Manager does not reallocate any addresses from that pool that have been
assigned to vNICs or vHBAs. All assigned addresses from a deleted pool remain with the vNIC or vHBA to
which they are assigned until one of the following occurs:
• The associated service profiles are deleted.
• The vNIC or vHBA to which the address is assigned is deleted.
• The vNIC or vHBA is assigned to a different pool.
Procedure
Step 1
In the Navigation pane, click the SAN tab.
Step 2
In the SAN tab, expand SAN > Pools > Organization_Name .
Step 3
Expand the WWPN Pools node.
Step 4
Right-click the WWPN pool you want to delete and select Delete.
Step 5
If the Cisco UCS Manager GUI displays a confirmation dialog box, click Yes.
Cisco UCS Manager GUI Configuration Guide, Release 2.0
OL-25712-04 353
Configuring WWPN Pools