Filter
Top Products
• FTP
• SFTP
Step 9
In the Server Information area, complete the following fields:
DescriptionName
The IP address of the computer where the full state
backup file is located. This can be a server, storage
array, local drive, or any read/write media that the
fabric interconnect can access through the network.
Server IP
The file path where the full state backup file is
located, including the folder names and filename.
Backup File Path
The username the system should use to log in to the
remote server. This field does not apply if the protocol
is TFTP.
User ID
The password for the remote server username. This
field does not apply if the protocol is TFTP.
Password
Step 10
Click Submit.
You can return to the console to watch the progress of the system restore.
The fabric interconnect logs in to the backup server, retrieves a copy of the specified full-state backup file,
and restores the system configuration.
For a cluster configuration, you do not need to restore the secondary fabric interconnect. As soon as the
secondary fabric interconnect reboots, Cisco UCS Manager sychronizes the configuration with the primary
fabric interconnect.
Cisco UCS Manager GUI Configuration Guide, Release 2.0
632 OL-25712-04
Restoring the Configuration for a Fabric Interconnect