Filter
Top Products
• To remove ports, choose one or more ports in the Ports in the port channel table, and then click the
<< button to remove the ports from the port channel and add them to the Ports table.
Step 7
Click OK.
Deleting an Uplink Ethernet Port Channel
Procedure
Step 1
In the Navigation pane, click the LAN tab.
Step 2
On the LAN tab, expand LAN > LAN Cloud.
Step 3
Expand the node for the fabric interconnect where you want to delete the port channel.
Step 4
Click the Port Channels node.
Step 5
In the General tab for the Port Channels node, choose the port channel you want to delete.
Step 6
Right-click the port channel and choose Delete.
Appliance Port Channels
An appliance port channel allows you to group several physical appliance ports to create one logical Ethernet
storage link for the purpose of providing fault-tolerance and high-speed connectivity. In Cisco UCS Manager,
you create a port channel first and then add appliance ports to the port channel. You can add up to eight
appliance ports to a port channel.
Creating an Appliance Port Channel
Procedure
Step 1
In the Navigation pane, click the LAN tab.
Step 2
On the LAN tab, expand LAN > Appliances.
Step 3
Expand the node for the fabric interconnect where you want to add the port channel.
Step 4
Right-click the Port Channels node and choose Create Port Channel.
Step 5
In the Set Port Channel Name page of the Create Port Channel wizard, complete the following fields to
specify the identity and other properties of the port channel:
DescriptionName
The unique identifier of the port channel.
Enter an integer between 1 and 256. This ID cannot be changed after
the port channel has been saved.
ID field
Cisco UCS Manager GUI Configuration Guide, Release 2.0
100 OL-25712-04
Appliance Port Channels