Filter
Top Products
• Minor
• Warning
• Condition
• Info
e) In the Up and Down fields, enter the range of values that should trigger the alarm.
f) In the Alarm Triggers (Below Normal Value) field, check one or more of the following check boxes:
• Info
• Condition
• Warning
• Minor
• Major
• Critical
g) In the Up and Down fields, enter the range of values that should trigger the alarm.
h) Click Finish Stage.
i) Do one of the following:
• To define another threshold property for the class, repeat Step 6.
• If you have defined all required properties for the class, click Finish Stage.
Step 7
In the Create Threshold Class page of the Create Threshold Policy wizard, do one the following:
• To configure another threshold class for the policy, repeat Steps 5 and 6.
• If you have configured all required threshold classes for the policy, click Finish.
Adding a Threshold Class to the Fibre Channel Port Threshold Policy
You cannot create a Fibre Channel port threshold policy. You can only modify or delete the default policy.
Procedure
Step 1
In the Navigation pane, click the SAN tab.
Step 2
On the SAN tab, expand SAN > SAN Cloud.
Step 3
Expand the Threshold Policies node.
Step 4
Right-click Thr-policy-default and choose the Create Threshold Class.
Step 5
In the Choose Statistics Class page of the Create Threshold Class wizard, do the following:
a) From the Stat Class drop-down list, choose the statistics class for which you want to configure a custom
threshold.
Cisco UCS Manager GUI Configuration Guide, Release 2.0
672 OL-25712-04
Configuring Statistics Threshold Policies