In the event of a management interface failure on a fabric interconnect, the managing instance may not
change if one of the following occurs:
Important
• A path to the end-point through the subordinate fabric interconnect does not exist.
• The management interface for the subordinate fabric interconnect has failed.
• The path to the end-point through the subordinate fabric interconnect has failed.
Configuring the Management Interfaces Monitoring Policy
Procedure
Step 1
In the Navigation pane, click the Admin tab.
Step 2
In the Admin tab, expand All > Communication Management.
Step 3
Click Management Interfaces.
Step 4
In the Work pane, click the Management Interfaces Monitoring Policy tab.
Step 5
Complete the following fields:
DescriptionName
Whether the monitoring policy is enabled or disabled for the
management interfaces.
Admin Status field
The number of seconds the system should wait between data recordings.
Enter an integer between 90 and 300.
Poll Interval field
The maximum number of monitoring attempts that can fail before the
system assumes that the management interface is unavailable and
generates a fault message.
Enter an integer between 2 and 5.
Max Fail Report Count field
Cisco UCS Manager GUI Configuration Guide, Release 2.0
656 OL-25712-04
Monitoring Management Interfaces
