Filter
Top Products
Procedure
Step 1
In the Navigation pane, click the Servers tab.
Step 2
On the Servers tab, expand Servers > Policies > Organization_Name.
Step 3
Expand the Server Pool Policy Qualifications node.
Step 4
Choose the policy you want to modify.
Step 5
In the Work pane, choose the Qualifications tab.
Step 6
To delete a set of qualifications:
a) In the table, choose the row that represents the set of qualifications.
b) Right-click the row and select Delete.
Step 7
Click Save Changes.
Configuring vNIC/vHBA Placement Policies
vNIC/vHBA Placement Policies
vNIC/vHBA placement policies are used to determine what types of vNICs or vHBAs can be assigned to the
physical adapters on a server. Each vNIC/vHBA placement policy contains four virtual network interface
connections (vCons) that are virtual representations of the physical adapters. When a vNIC/vHBA placement
policy is assigned to a service profile, and the service profile is associated with a server, the vCons in the
vNIC/vHBA placement policy are assigned to the physical adapters.
If you do not include a vNIC/vHBA placement policy in the service profile or you use the default configuration
for a server with two adapters, Cisco UCS Manager defaults to the All configuration and equally distributes
the vNICs and vHBAs between the adapters.
You can use this policy to assign vNICs or vHBAs to either of the two vCons. Cisco UCS Manager uses the
vCon assignment to determine how to assign the vNICs and vHBAs to the physical adapter during service
profile association.
• All—All configured vNICs and vHBAs can be assigned to the vCon, whether they are explicitly assigned
to it, unassigned, or dynamic.
• Assigned Only—vNICs and vHBAs must be explicitly assigned to the vCon. You can assign them
explicitly through the service profile or the properties of the vNIC or vHBA.
• Exclude Dynamic—Dynamic vNICs and vHBAs cannot be assigned to the vCon. The vCon can be
used for all static vNICs and vHBAs, whether they are unassigned or explicitly assigned to it.
• Exclude Unassigned—Unassigned vNICs and vHBAs cannot be assigned to the vCon. The vCon can
be used for dynamic vNICs and vHBAs and for static vNICs and vHBAs that are explicitly assigned to
it.
Cisco UCS Manager GUI Configuration Guide, Release 2.0
OL-25712-04 429
Configuring vNIC/vHBA Placement Policies