Filter
Top Products
b) In the Chassis Qualifications area of the Create Chassis and Server Qualifications dialog box, complete
the following fields to specify the range of chassis you want to use:
• First Chassis ID field—The first chassis ID from which server pools associated with this policy can
draw.
• Number of Chassis field—The total number of chassis to include in the pool, starting with the
chassis identified in the First Chassis ID field.
Example:
For example, if you want to use chassis 5, 6, 7, and 8, enter 5 in the First Chassis ID field and 4 in the
Number of Chassis field. If you want to use only chassis 3, enter 3 in the First Chassis ID field and 1
in the Number of Chassis field.
If you want to use chassis 5, 6, and 9, create a chassis/server qualification for the range 5-6 and
another qualification for chassis 9. You can add as many chassis/server qualifications as needed.
Tip
c) Click Finish.
Step 8
(Optional) To use this policy to qualify servers according to both the chassis and slot in which they physically
reside, do the following:
a) Click Create Chassis/Server Qualifications.
b) In the Chassis Qualifications area of the Create Chassis and Server Qualifications dialog box, complete
the following fields to specify the range of chassis you want to use:
• First Chassis ID field—The first chassis ID from which server pools associated with this policy can
draw.
• Number of Chassis field—The total number of chassis to include in the pool, starting with the
chassis identified in the First Chassis ID field.
c) In the Server Qualifications table, click Add.
d) In the Create Server Qualifications dialog box, complete the following fields to specify the range of
server locations you want to use:
• First Slot ID field—The first slot ID from which server pools associated with this policy can draw.
• Number of Slots field—The total number of slots from which server pools associated with this
policy can draw.
e) Click Finish Stage.
f) To add another range of slots, click Add and repeat steps d and e.
g) When you have finished specifying the slot ranges, click Finish.
Step 9
(Optional) To use this policy to qualify servers according to their memory configuration, do the following:
a) Click Create Memory Qualifications.
b) In the Create Memory Qualifications dialog box, complete the following fields:
DescriptionName
The minimum clock speed required, in megahertz.Clock field
The maximum latency allowed, in nanoseconds.Latency field
Cisco UCS Manager GUI Configuration Guide, Release 2.0
OL-25712-04 425
Configuring Server Pool Policy Qualifications