Filter
Top Products
• Critical
g) In the Up and Down fields, enter the range of values that should trigger the alarm.
h) Click Finish Stage.
i) Do one of the following:
• To define another threshold property for the class, repeat Step 6.
• If you have defined all required properties for the class, click Finish Stage.
Step 7
In the Create Threshold Class page of the Create Threshold Policy wizard, do one the following:
• To configure another threshold class for the policy, repeat Steps 5 and 6.
• If you have configured all required threshold classes for the policy, click Finish.
Adding a Threshold Class to the Ethernet Server Port, Chassis, and Fabric Interconnect
Threshold Policy
You cannot create an Ethernet server port, chassis, and fabric interconnect threshold policy. You can only
modify or delete the default policy.
Tip
Procedure
Step 1
In the Navigation pane, click the LAN tab.
Step 2
In the LAN tab, expand LAN > Internal LAN.
Step 3
Expand the Threshold Policies node.
Step 4
Right-click Thr-policy-default and choose the Create Threshold Class.
Step 5
In the Choose Statistics Class page of the Create Threshold Class wizard, do the following:
a) From the Stat Class drop-down list, choose the statistics class for which you want to configure a custom
threshold.
b) Click Next.
Step 6
In the Threshold Definitions page, do the following:
a) Click Add.
The Create Threshold Definition dialog box opens.
b) From the Property Type field, choose the threshold property that you want to define for the class.
c) In the Normal Value field, enter the desired value for the property type.
d) In the Alarm Triggers (Above Normal Value) field, check one or more of the following check boxes:
• Critical
• Major
Cisco UCS Manager GUI Configuration Guide, Release 2.0
OL-25712-04 671
Configuring Statistics Threshold Policies