Filter
Top Products
DescriptionName
The name of this vHBA.
This name can be between 1 and 16 alphanumeric characters. You
cannot use spaces or any special characters other than - (hyphen), _
(underscore), : (colon), and . (period), and you cannot change this
name after the object has been saved.
Name field
Check this check box if you want to use a template to create the
vHBA. Cisco UCS Manager GUI displays the vHBA Template
drop-down list from which you can select the appropriate template,
and the Adapter Performance Profile area from which you can
select an adapter profile.
You can only select this option if one or more SAN
connectivity templates exist in the system.
Note
Use SAN Connectivity Template
check box
Click this link if you want to create a vHBA template.Create vHBA Template link
If you want to:
• Use the default WWPN pool, leave this field set to Select (pool
default used by default).
• Use the WWPN assigned to the server by the manufacturer,
select Hardware Default.
• A specific WWPN, select 20:00:00:25:B5:00:00:00,
20:XX:XX:XX:XX:XX:XX:XX, or
5X:XX:XX:XX:XX:XX:XX:XX and enter the WWPN in the
WWPN field. To verify that this WWPN is available, click the
corresponding link.
• A WWPN from a pool, select the pool name from the list. Each
pool name is followed by a pair of numbers in parentheses. The
first number is the number of available WWN addresses in the
pool and the second is the total number of WWPN addresses in
the pool.
To create a new WWPN pool, click Create WWPN Pool.
WWPN Assignment drop-down
list
d) In the VSAN area, complete the following fields:
DescriptionName
The fabric interconnect associated with the component.Fabric ID field
The VSAN with which this vHBA is associated.Select VSAN drop-down list box
Click this link if you want to create a VSAN.Create VSAN link
The pin group with which this vHBA is associated.Pin Group drop-down list box
Cisco UCS Manager GUI Configuration Guide, Release 2.0
OL-25712-04 523
Working with Service Profile Templates