Filter
Top Products
Toggling the Locator LED
Turning on the Locator LED for a Chassis
Procedure
Step 1
In the Navigation pane, click the Equipment tab.
Step 2
On the Equipment tab, expand Equipment > Chassis.
Step 3
Click the chassis that you need to locate.
Step 4
In the Work pane, click the General tab.
Step 5
In the Actions area, click Turn on Locator LED.
This action is not available if the locator LED is already turned on.
The LED on the chassis starts flashing.
Turning off the Locator LED for a Chassis
Procedure
Step 1
In the Navigation pane, click the Equipment tab.
Step 2
On the Equipment tab, expand Equipment > Chassis.
Step 3
Choose the chassis for which you want to turn off the locator LED.
Step 4
In the Work pane, click the General tab.
Step 5
In the Actions area, click Turn off Locator LED.
This action is not available if the locator LED is already turned off.
The LED on the chassis stops flashing.
Viewing the POST Results for a Chassis
You can view any errors collected during the Power On Self-Test process for all servers and adapters in a
chassis.
Cisco UCS Manager GUI Configuration Guide, Release 2.0
582 OL-25712-04
Toggling the Locator LED