Cisco Systems OL-25712-04 Security Camera User Manual


 
Adding a WWPN Initiator to a WWPN Pool
A WWN pool can include only WWNNs or WWPNs in the ranges from 20:00:00:00:00:00:00:00 to
20:FF:FF:FF:FF:FF:FF:FF or from 50:00:00:00:00:00:00:00 to 5F:FF:FF:FF:FF:FF:FF:FF. All other
WWN ranges are reserved. To ensure the uniqueness of the Cisco UCS WWNNs and WWPNs in the SAN
fabric, we recommend that you use the following WWN prefix for all blocks in a pool:
20:00:00:25:B5:XX:XX:XX
Important
Procedure
Step 1
In the Navigation pane, click the SAN tab.
Step 2
In the SAN tab, expand SAN > Pools > Organization_Name .
Step 3
Expand the WWPN Pools node.
Step 4
Right-click the WWPN pool to which you want to add a WWPN initiatorand selectCreate WWPN Initiator.
Step 5
In the Create WWPN Initiator dialog box, complete the following fields:
DescriptionName
The WWN.World Wide Name field
The name of the WWPN initiator.
This name can be between 1 and 16 alphanumeric characters. You
cannot use spaces or any special characters other than - (hyphen), _
(underscore), : (colon), and . (period), and you cannot change this name
after the object has been saved.
Name field
A user-defined description of the WWPN initiator.
Enter up to 256 characters. You can use any characters or spaces except
^ (carat), \ (backslash), > (greater than), < (less than), ' (single quote),
" (double quote), ` (accent mark), or = (equal sign).
Description field
Step 6
If you want to add a SAN boot target, expand the Boot Target area and complete the following fields:
DescriptionName
The WWPN that corresponds to the location of the boot image.Boot Target WWPN field
The LUN that corresponds to the location of the boot image.Boot Target LUN field
Step 7
Click OK.
Cisco UCS Manager GUI Configuration Guide, Release 2.0
352 OL-25712-04
Configuring WWPN Pools