Filter
Top Products
Procedure
Step 1
In the Navigation pane, click the Admin tab.
Step 2
On the Admin tab, expand All > User Management > Authentication.
Step 3
Click Native Authentication.
Step 4
In the Work pane, click the General tab.
Step 5
In the Default Authentication area, complete the following fields:
DescriptionName
The default method by which a user is authenticated
during remote login. This can be one of the following:
• Local—The user account must be defined
locally in this Cisco UCS domain.
• Radius—The user must be defined on the
RADIUS server specified for this Cisco UCS
domain.
• Tacacs—The user must be defined on the
TACACS+ server specified for this Cisco UCS
domain.
• Ldap—The user must be defined on the LDAP
server specified for this Cisco UCS domain.
• None—If the user account is local to this Cisco
UCS domain, no password is required when the
user logs in remotely.
Realm drop-down list
The default provider group to be used to authenticate
the user during remote login.
Provider Group drop-down list
Step 6
Click Save Changes.
Role Policy for Remote Users
By default, if user roles are not configured in Cisco UCS Manager read-only access is granted to all users
logging in to Cisco UCS Manager from a remote server using the LDAP, RADIUS, or TACACS protocols.
For security reasons, it might be desirable to restrict access to those users matching an established user role
in Cisco UCS Manager.
You can configure the role policy for remote users in the following ways:
Cisco UCS Manager GUI Configuration Guide, Release 2.0
OL-25712-04 153
Selecting a Primary Authentication Service