Filter
Top Products
DescriptionOption
An IPv4 address is assigned to the iSCSI boot vNIC from the management
IP address pool.
Proceed to Step 13.
Pool
Step 12
If you chose Static from the Initiator IP Address Policy drop-down list, complete the following fields:
DescriptionName
The IPv4 address assigned to the iSCSI boot vNIC.
If you want to specify this address, you must select Static in the
Initiator IP Address Policy drop-down list.
IPv4 Address field
The subnet mask associated with the IPv4 address.Subnet Mask field
The default gateway associated with the IPv4 address.Default Gateway field
The primary DNS server address.Primary DNS field
The secondary DNS server address.Secondary DNS field
Step 13
For the iSCSI target interface, choose one of the following radio buttons:
DescriptionOption
The system creates a static target interface that you need to configure.
Proceed to Step 14.
iSCSI Static Target Interface
The system creates an auto target interface. You need to specify whether
the auto target uses an initiator or a DCHP vendor ID.
Proceed to Step 16.
iSCSI Auto Target Interface
Step 14
If you chose iSCSI Static Target Interface, in the Static Target Interface table, click Add.
Step 15
In the Create iSCSI Static Target dialog box, complete the following fields:
Cisco UCS Manager GUI Configuration Guide, Release 2.0
456 OL-25712-04
iSCSI Boot