Filter
Top Products
b) Click OK.
Step 4
Click Save Changes.
What to Do Next
For implementations involving a single RADIUS database, select RADIUS as the primary authentication
service.
For implementations involving multiple RADIUS databases, configure a RADIUS provider group.
Deleting a RADIUS Provider
Procedure
Step 1
In the Navigation pane, click the Admin tab.
Step 2
In the Admin tab, expand User Management > RADIUS.
Step 3
Right-click the RADIUS provider you want to delete and choose Delete.
Step 4
If the Cisco UCS Manager GUI displays a confirmation dialog box, click Yes.
Configuring TACACS+ Providers
Configuring Properties for TACACS+ Providers
The properties that you configure in this task are the default settings for all provider connections of this type
defined in Cisco UCS Manager. If an individual provider includes a setting for any of these properties, Cisco
UCS uses that setting and ignores the default setting.
Procedure
Step 1
In the Navigation pane, click the Admin tab.
Step 2
In the Admin tab, expand User Management > TACACS+.
Step 3
In the Properties area, complete the Timeout field:
The length of time in seconds the system should spend trying to contact the TACACS+ database before it
times out.
Enter an integer from 1 to 60 seconds, or enter 0 (zero) to use the global timeout value specified on the
TACACS+ General tab. The default is 5 seconds.
Step 4
Click Save Changes.
Cisco UCS Manager GUI Configuration Guide, Release 2.0
144 OL-25712-04
Configuring TACACS+ Providers