Filter
Top Products
Creating a Call Home Profile
By default, you must configure the Cisco TAC-1 profile. However, you can also create additional profiles to
send email alerts to one or more specified groups when events occur at the level that you specify.
Procedure
Step 1
In the Navigation pane, click the Admin tab.
Step 2
On the Admin tab, expand All > Communication Management > Call Home.
Step 3
In the Work pane, click the Profiles tab.
Step 4
On the icon bar to the right of the table, click +.
If the + icon is disabled, click an entry in the table to enable it.
Step 5
In the Create Call Home Profile dialog box, complete the following information fields:
DescriptionName
A user-defined name for this profile.
This name can be between 1 and 16 alphanumeric characters. You
cannot use spaces or any special characters other than - (hyphen), _
(underscore), : (colon), and . (period), and you cannot change this name
after the object has been saved.
Name field
Cisco UCS faults that are greater than or equal to this level trigger the
profile. This can be one of the following:
• Critical
• Debug
• Disaster
• Fatal
• Major
• Minor
• Normal
• Notification
• Warning
Level field
Cisco UCS Manager GUI Configuration Guide, Release 2.0
686 OL-25712-04
Configuring Call Home Profiles