Filter
Top Products
DescriptionName
The subnet mask associated with the IP addresses in the block.
All IP addresses in the management IP pool must be in the same subnet
as the IP address of the fabric interconnect.
Subnet Mask field
The default gateway associated with the IP addresses in the block.Default Gateway field
Step 6
Click OK.
What to Do Next
Configure one or more service profiles or service profile templates to obtain the iSCSI initiator IP address
from the iSCSI initiator IP pool.
Deleting an iSCSI Initiator IP Pool
Procedure
Step 1
In the Navigation pane, click the LAN tab.
Step 2
In the LAN tab, expand LAN > Pools > Organization_Name .
Step 3
Expand the IP Pools (iscsi-initiator-pools) node.
Step 4
Right-click the IP pool you want to delete and choose Delete.
Step 5
If the Cisco UCS Manager GUI displays a confirmation dialog box, click Yes.
Creating an iSCSI Boot Policy
You can add up to two iSCSI vNICs per boot policy. One vNIC acts as the primary iSCSI boot source, and
the other acts as the secondary iSCSI boot source.
Procedure
Step 1
In the Navigation pane, click the Servers tab.
Step 2
On the Servers tab, expand Servers > Policies.
Step 3
Expand the node for the organization where you want to create the policy.
If the system does not include multitenancy, expand the root node.
Step 4
Right-click Boot Policies and choose Create Boot Policy.
The Create Boot Policy wizard displays.
Step 5
Enter a unique name and description for the policy.
Cisco UCS Manager GUI Configuration Guide, Release 2.0
OL-25712-04 451
iSCSI Boot