Filter
Top Products
Procedure
Step 1
In the Navigation pane, click the Admin tab.
Step 2
On the Admin tab, expand All > User Management > User Services > Locally Authenticated Users.
Step 3
Click the user account that you want to modify.
Step 4
In the Work pane, click the General tab.
Step 5
In the Roles area, do the following:
• To assign a new role to the user account, check the appropriate check boxes.
• To remove a role from the user account, uncheck the appropriate check boxes.
Step 6
Click Save Changes.
Enabling a User Account
You must be a user with admin or aaa privileges to enable or disable a local user account.
Before You Begin
Create a local user account.
Procedure
Step 1
In the Navigation pane, click the Admin tab.
Step 2
On the Admin tab, expand All > User Management > User Services > Locally Authenticated Users.
Step 3
Click the user that you want to enable.
Step 4
In the Work pane, click the General tab.
Step 5
In the Account Status field, click the active radio button.
Step 6
Click Save Changes.
Disabling a User Account
You must be a user with admin or aaa privileges to enable or disable a local user account.
If you change the password on a disabled account through the Cisco UCS Manager GUI, the user cannot
use this changed password after you enable the account and make it active. The user must enter the required
password again after the account is enabled and made active.
Note
Cisco UCS Manager GUI Configuration Guide, Release 2.0
176 OL-25712-04
Configuring Locally Authenticated User Accounts