Filter
Top Products
a) Complete the following fields:
DescriptionName
The name of the one time occurrence of this schedule.
This name can be between 1 and 16 alphanumeric characters. You
cannot use spaces or any special characters other than - (hyphen), _
(underscore), : (colon), and . (period), and you cannot change this
name after the object has been saved.
Name field
The date and time that the occurrence will run.
Click the down arrow at the end of the field to select the date from a
calendar.
Start Time field
b) Click the down arrows to expand the Options area.
c) In the Options area, complete the following fields:
DescriptionName
The maximum length of time that the scheduled occurrence can run.
This can be one of the following:
• None—The occurrence runs until all tasks are completed.
• other—Cisco UCS Manager GUI displays the dd:hh:mm:ss
field allowing you to specify the maximum amount of time that
the occurrence can run. Cisco UCS completes as many scheduled
tasks as possible within the specified time.
By default, the maximum duration is set to none. If you do not change
this setting and you do not set a maximum number of tasks, the
maintenance window continues until all pending activities are
completed.
Max Duration field
The maximum number of scheduled tasks that can be run during this
occurrence. This can be one of the following:
• Unlimited—Cisco UCS runs all scheduled tasks unless those
tasks exceed the maximumtime specifiedin theMax Duration
field. If Max Duration is set to none and you select this option,
the maintenance window continues until all pending activities
are completed.
• other—Cisco UCS Manager GUI displays a text field allowing
you to specify the maximum number of tasks that can be run
during this occurrence. Enter an integer between 1 and 65535.
Max Number of Tasks field
Cisco UCS Manager GUI Configuration Guide, Release 2.0
OL-25712-04 473
Configuring Schedules