Filter
Top Products
Procedure
Step 1
In the Navigation pane, click the Equipment tab.
Step 2
On the Equipment tab, expand Equipment > Chassis > Chassis Number > Servers.
Step 3
Choose the server that you want to remove from the chassis.
Step 4
In the Work pane, click the General tab.
Step 5
In the Actions area, click Server Maintenance.
Step 6
In the Maintenance dialog box, do the following:
a) Click Decommission.
b) Click OK.
The server is removed from the Cisco UCS configuration.
Step 7
Go to the physical location of the chassis and remove the server hardware from the slot.
For instructions on how to remove the server hardware, see the Cisco UCS Hardware Installation Guide for
your chassis.
What to Do Next
If you physically re-install the blade server, you must re-acknowledge the slot to have Cisco UCS Manager
rediscover the server.
For more information, see Reacknowledging a Server Slot in a Chassis, on page 593.
Decommissioning a Blade Server
Procedure
Step 1
In the Navigation pane, click the Equipment tab.
Step 2
On the Equipment tab, expand Equipment > Chassis > Chassis Number > Servers.
Step 3
Choose the server that you want to decommission.
Step 4
In the Work pane, click the General tab.
Step 5
In the Actions area, click Server Maintenance.
Step 6
In the Maintenance dialog box, do the following:
a) Click Decommission.
b) Click OK.
The server is removed from the Cisco UCS configuration.
What to Do Next
If you physically re-install the blade server, you must re-acknowledge the slot to have Cisco UCS Manager
rediscover the server.
Cisco UCS Manager GUI Configuration Guide, Release 2.0
592 OL-25712-04
Decommissioning a Blade Server