Filter
Top Products
DescriptionSubtab
Displays the ports, port channels, and VLANs that are accessible to fabric
interconnect B.
Fabric B
Step 6
In the Ports and Port Channels table, do the following:
• To assign an Uplink Ethernet port channel to a VLAN, expand the Port Channels node and click the
port channel you want to assign to the VLAN.
• To assign an Uplink Ethernet port to the VLAN, expand the Uplink Interfaces node and click the port
you want to assign to the VLAN
You can hold down the Ctrl key and click multiple ports or port channels to assign to them to the same VLAN
or set of VLANs .
Step 7
In the VLANs table, expand the appropriate node if necessary and click the VLAN to which you want to
assign the port or port channel.
You can hold down the Ctrl key and click multiple VLANs if you want to assign the same set of ports and/or
port channels to them.
Step 8
Click the Add to VLAN button.
Step 9
If the Cisco UCS Manager GUI displays a confirmation dialog box, click Yes.
Step 10
To assign additional ports or port channels to VLANs on the same fabric, repeat Steps 6, 7, and 8.
Step 11
To assign additional ports or port channels to VLANs on a different fabric, repeat Steps 5 through 8.
If the Cisco UCS domain is configured for high availability with two fabric interconnects, we recommend
that you create the same set of VLANs on both fabric interconnects.
Step 12
If the Cisco UCS Manager GUI displays a confirmation dialog box, click Yes.
Step 13
Click Apply if you want to continue to work in the VLAN Manager, or click OK to close the window.
After a port or port channel is assigned to one or more VLANs, it is removed from all other VLANs.
Removing Ports and Port Channels from VLANs
Procedure
Step 1
In the Navigation pane, click the LAN tab.
Step 2
On the LAN tab, click the LAN node.
Step 3
In the Work pane, click the LAN Uplinks Manager link on the LAN Uplinks tab.
The LAN Uplinks Manager opens in a separate window.
Step 4
In the LAN Uplinks Manager, click VLANs > VLAN Manager.
Step 5
Click one of the following subtabs to configure ports and port channels on that fabric interconnect:
Cisco UCS Manager GUI Configuration Guide, Release 2.0
328 OL-25712-04
Removing Ports and Port Channels from VLANs