Filter
Top Products
DescriptionName
The number of times that the system tries to log into a port after the
first failure.
Enter an integer between 0 and 255. The default is 8. We recommend
you consult your storage array documentation for the optimal value for
this parameter.
This parameter only applies to a server with a VIC
adapter.
Note
Plogi Retries field
The number of milliseconds that the system waits before it tries to log
in again.
Enter an integer between 1000 and 255000. The default is 20,000. We
recommend you consult your storage array documentation for the
optimal value for this parameter.
This parameter only applies to a server with a VIC
adapter.
Note
Plogi Timeout field
The number of milliseconds to wait before the system assumes that an
error has occurred.
This value cannot be changed.
Error Detect Timeout field
The number of milliseconds a remote Fibre Channel port should be
offline before informing the SCSI upper layer that the port is unavailable.
This parameter is important for host multi-pathing drivers and it is one
of the key indicators used for error processing.
Enter an integer between 0 and 240000. The default is 30,000. For a
server with a VIC adapter running ESX, the recommended value is
10,000.
We recommend you consult your storage array documentation for the
optimal value for this parameter.
This parameter only applies to a server with a VIC
adapter.
Note
Port Down Timeout field
The number of times an IO request to a port is returned because the port
is busy before the system decides the port is unavailable.
Enter an integer between 0 and 255. The default is 8. We recommend
you consult your storage array documentation for the optimal value for
this parameter.
This parameter only applies to a server with a VIC adapter
running Windows.
Note
Port Down IO Retry field
Cisco UCS Manager GUI Configuration Guide, Release 2.0
362 OL-25712-04
Configuring Fibre Channel Adapter Policies