Filter
Top Products
• Logical configuration
Before You Begin
Collect the following information that you will need to import a configuration file:
• Backup server IP address and authentication credentials
• Fully qualified name of a backup file
Procedure
Step 1
In the Navigation pane, click the Admin tab.
Step 2
Click the All node.
Step 3
In the Work pane, click the General tab.
Step 4
In the Actions area, click Import Configuration.
Step 5
In the Import Configuration dialog box, click Create Import Operation.
Step 6
In the Create Import Operation dialog box, complete the following fields:
DescriptionName
This can be one of the following:
• Enabled—Cisco UCS runs the import operation as soon as you
click OK.
• Disabled—Cisco UCS does not run the import operation when
you click OK. If you select this option, all fields in the dialog box
remain visible. However, you must manually run the import from
the Import Configuration dialog box.
Admin State field
This can be one of the following:
• Merge—The configuration informationis merged with the existing
information. If there are conflicts, the system replaces the
information on the current system with the information in the
import configuration file.
• Replace—The system takes each object in the import configuration
file and overwrites the corresponding object in the current
configuration.
Action field
Cisco UCS Manager GUI Configuration Guide, Release 2.0
OL-25712-04 627
Import Operations