Filter
Top Products
DescriptionName
The IP address or hostname of the SMTP server.
If you use a hostname rather than an IP address, you must
configure a DNS server in Cisco UCS Manager.
Note
Host field
The port number the system should use to talk to the SMTP server.
Enter an integer between 1 and 65535. The default is 25.
Port field
Step 9
Click Save Changes.
Disabling Call Home
Procedure
Step 1
In the Navigation pane, click the Admin tab.
Step 2
On the Admin tab, expand All > Communication Management > Call Home.
Step 3
In the Work pane, click the General tab.
Step 4
In the Admin area, click off in the State field.
If this field is set to off, Cisco UCS Manager hides the rest of the fields on this
tab.
Note
Step 5
Click Save Changes.
Enabling Call Home
Procedure
Step 1
In the Navigation pane, click the Admin tab.
Step 2
On the Admin tab, expand All > Communication Management > Call Home.
Step 3
In the Work pane, click the General tab.
Step 4
In the Admin area, click on in the State field.
If this field is set to On, Cisco UCS Manager GUI displays the rest of the fields on this
tab.
Note
Step 5
Click Save Changes.
Cisco UCS Manager GUI Configuration Guide, Release 2.0
OL-25712-04 683
Disabling Call Home