Filter
Top Products
If the system does not include multitenancy, expand the root node.
Step 4
Right-click the vHBA Templates node and choose Create vHBA Template.
Step 5
In the Create vHBA Template dialog box, complete the following fields:
DescriptionName
The name of the virtual HBA template.
This name can be between 1 and 16 alphanumeric characters. You
cannot use spaces or any special characters other than - (hyphen), _
(underscore), : (colon), and . (period), and you cannot change this name
after the object has been saved.
Name field
A user-defined description of the template.
Enter up to 256 characters. You can use any characters or spaces except
^ (carat), \ (backslash), > (greater than), < (less than), ' (single quote),
" (double quote), ` (accent mark), or = (equal sign).
Description field
The name of the fabric interconnect that vHBAs created with this
template are associated with.
Fabric ID field
The VSAN to associate with vHBAs created from this template.Select VSAN drop-down list
Click this link if you want to create a VSAN.Create VSAN link
This can be one of the following:
• Initial Template—vHBAs created from this template are not
updated if the template changes.
• Updating Template—vHBAs created from this template are
updated if the template changes.
Template Type field
The maximum size of the Fibre Channel frame payload bytes that the
vHBA supports.
Enter an integer between 256 and 2112. The default is 2048.
Max Data Field Size field
The WWN pool that a vHBA created from this template uses to derive
its WWN address.
WWN Pool drop-down list
The QoS policy that is associated with vHBAs created from this
template.
QoS Policy drop-down list
The LAN pin group that is associated with vHBAs created from this
template.
Pin Group drop-down list
The statistics collection policy that is associated with vHBAs created
from this template.
Stats Threshold Policy drop-down
list
Cisco UCS Manager GUI Configuration Guide, Release 2.0
356 OL-25712-04
Configuring vHBA Templates