Filter
Top Products
Creating a Hardware Based Service Profile for a Blade Server
You cannot move a hardware based service profile to another server.
Procedure
Step 1
In the Navigation pane, click the Equipment tab.
Step 2
On the Equipment tab, expand Equipment > Chassis > Chassis Number > Servers.
Step 3
Choose the server for which you want to create a hardware based service profile.
Step 4
In the Work pane, click the General tab.
Step 5
In the Actions area, click Create Service Profile.
Step 6
In the Create Service Profile for Server dialog box, do the following:
a) From the Create Service Profile in Organization drop-down list, select the organization in which you
want to create the service profile.
b) Click the Hardware Based Service Profile radio button.
c) In the Name field, enter a unique name for the service profile.
This name can be between 2 and 32 alphanumeric characters. You cannot use spaces or any special
characters other than - (hyphen), _ (underscore), : (colon), and . (period), and this name must be unique
across all service profiles and service profile templates within the same organization.
d) If you want Cisco UCS Manager to create vNICs for the service profile, check the Create Default vNICs
check box.
e) If you want Cisco UCS Manager to create vHBAs for the service profile, check the Create Default vHBAs
check box.
f) Click OK.
Cisco UCS Manager inherits and automatically applies the identity and configuration information in the server,
creates the service profile, and associates it with the server.
Creating a Hardware Based Service Profile for a Rack-Mount Server
You cannot move a hardware based service profile to another server.
Procedure
Step 1
In the Navigation pane, click the Equipment tab.
Step 2
On the Equipment tab, expand Equipment > Rack Mounts > Servers.
Step 3
Choose the server for which you want to create a hardware based service profile.
Step 4
In the Work pane, click the General tab.
Step 5
In the Actions area, click Create Service Profile.
Step 6
In the Create Service Profile for Server dialog box, do the following:
Cisco UCS Manager GUI Configuration Guide, Release 2.0
OL-25712-04 517
Creating Service Profiles