Filter
Top Products
DescriptionField
The static IPv4 address to be assigned to the service
profile
IP Address
The subnet mask for the IP address.Subnet Mask
The default gateway that the IP address should use.Default Gateway
Step 9
Click Save Changes.
Setting the Management IP Address on a Service Profile Template
Procedure
Step 1
In the Navigation pane, click the Servers tab.
Step 2
On the Servers tab, expand Servers > Service Profile Templates.
Step 3
Expand the node for the organization that contains the service profile template for which you want to set the
management IP address.
If the system does not include multitenancy, expand the root node.
Step 4
Click the service profile template for which you want to set the management IP address.
Step 5
In the Work pane, click the General tab.
Step 6
Expand the Management IP Address area.
Step 7
In the Management IP Address Policy field, click one of the following radio buttons:
• None—No management IP address is assigned to the service profile. The management IP address is set
based on the CIMC management IP address settings on the server.
• Pooled—A management IP address is assigned to the service profile from the management IP address
pool.
Step 8
Click Save Changes.
Configuring the Management IP Pool
Management IP Pool
The management IP pool is a collection of external IP addresses. Cisco UCS Manager reserves each block of
IP addresses in the management IP pool for external access that terminates in the CIMC on a server.
Cisco UCS Manager GUI Configuration Guide, Release 2.0
OL-25712-04 377
Setting the Management IP Address on a Service Profile Template