Filter
Top Products
• FC Adapters
• HBA Option ROM
• Storage Controller
You can include more than one type of firmware in the same host firmware package. For example, a host
firmware package can include both BIOS firmware and storage controller firmware or adapter firmware
for two different models of adapters. However, you can only have one firmware version with the same
type, vendor, and model number. The system recognizes which firmware version is required for an endpoint
and ignores all other firmware versions.
Tip
The firmware package is pushed to all servers associated with service profiles that include this policy.
This policy ensures that the host firmware is identical on all servers associated with service profiles which
use the same policy. Therefore, if you move the service profile from one server to another, the firmware
versions are maintained. Also, if you change the firmware version for an endpoint in the firmware package,
new versions are applied to all the affected service profiles immediately, which could cause server reboots.
You must include this policy in a service profile, and that service profile must be associated with a server for
it to take effect.
Prerequisites
This policy is not dependent upon any other policies. However, you must ensure that the appropriate firmware
has been downloaded to the fabric interconnect. If the firmware image is not available when Cisco UCS
Manager is associating a server with a service profile, Cisco UCS Manager ignores the firmware upgrade and
completes the association.
Management Firmware Package
This policy enables you to specify a set of firmware versions that make up the management firmware package
(also known as a management firmware pack). The management firmware package includes the Cisco Integrated
Management Controller (CIMC) on the server. You do not need to use this package if you upgrade the CIMC
directly.
The firmware package is pushed to all servers associated with service profiles that include this policy. This
policy ensures that the CIMC firmware is identical on all servers associated with service profiles which use
the same policy. Therefore, if you move the service profile from one server to another, the firmware versions
are maintained.
You must include this policy in a service profile, and that service profile must be associated with a server for
it to take effect.
This policy is not dependent upon any other policies. However, you must ensure that the appropriate firmware
has been downloaded to the fabric interconnect.
Effect of Updates to Host Firmware Packages and Management Firmware Packages
To update firmware through a host firmware package or a management firmware package, you need to update
the firmware in the package. What happens after you save the changes to a host or management firmware
package depends upon how the Cisco UCS domain is configured.
Cisco UCS Manager GUI Configuration Guide, Release 2.0
OL-25712-04 223
Upgrading Firmware through Service Profiles