Filter
Top Products
DescriptionName
The day on which Cisco UCS runs an occurrence of this schedule.
This can be one of the following:
• every day
• Monday
• Tuesday
• Wednesday
• Thursday
• Friday
• Saturday
• Sunday
• odd days
• even days
Day field
The hour of the specified day at which this occurrence of the schedule
starts. This can be an integer between 0 and 24, where 0 and 24 are
both equivalent to midnight.
Cisco UCS ends all recurring occurrences on the same day
in which they start, even if the maximum duration has not
been reached. For example, if you specify a start time of 11
p.m. and a maximum duration of 3 hours, Cisco UCS starts
the occurrence at 11 p.m. but ends it at 11:59 p.m. after only
59 minutes.
Note
Ensure that the start time you specify is early enough so that the
recurring occurrence finishes before 11:59 p.m.
Hour field
The minute of the hour at which the schedule occurrence starts. This
can be an integer between 0 and 60.
Minute field
b) Click the down arrows to expand the Options area.
c) In the Options area, complete the following fields:
DescriptionName
The maximum length of time that each occurrence of this schedule
can run. This can be one of the following:
• None—The occurrence runs until all tasks are completed.
• other—Cisco UCS Manager GUI displays the dd:hh:mm:ss
field allowing you to specify the maximum amount of time that
the occurrence can run. Cisco UCS completes as many scheduled
tasks as possible within the specified time.
Max Duration field
Cisco UCS Manager GUI Configuration Guide, Release 2.0
OL-25712-04 475
Configuring Schedules