Filter
Top Products
are grouped in a fabric port channel. If set to no group, links from the IOM to the fabric interconnect are not
grouped in a fabric port channel.
Once a fabric port channel is created, links can be added or removed by changing the link group preference
and reacknowledging the chassis, or by enabling or disabling the chassis from the port channel.
The link grouping preference only takes effect if both sides of the links between an IOM or FEX and the
fabric interconnect support fabric port channels. If one side of the links does not support fabric port
channels, this preference is ignored and the links are not grouped in a port channel.
Note
Configuring the Chassis Discovery Policy
Procedure
Step 1
In the Navigation pane, click the Equipment tab.
Step 2
On the Equipment tab, click the Equipment node.
Step 3
In the Work pane, click the Policies tab.
Step 4
Click the Global Policies subtab.
Step 5
In the Chassis Discovery Policy area, complete the following fields:
DescriptionName
Specifies the minimum threshold for the number of links between the
chassis and the fabric interconnect. This can be one of the following:
• 1-link
• 2-link
• 4-link
• 8-link
• Platform Max
Action field
Specifies whether the links from the IOMs to the fabric interconnects
are grouped in a port channel. This can be one of the following:
• None—No links are grouped in a port channel
• Port Channel—All links from an IOM to a fabric interconnect
are grouped in a port channel
The link grouping preference only takes effect if both sides of
the links between an IOM or FEX and the fabric interconnect
support fabric port channels. If one side of the links does not
support fabric port channels, this preference is ignored and the
links are not grouped in a port channel.
Note
Link Grouping Preference field
Cisco UCS Manager GUI Configuration Guide, Release 2.0
242 OL-25712-04
Configuring the Chassis Discovery Policy