Filter
Top Products
Unconfiguring a Port on a Fabric Interconnect
Procedure
Step 1
In the Navigation pane, click the Equipment tab.
Step 2
On the Equipment tab, expand Equipment > Fabric Interconnects > Fabric_Interconnect_Name.
Step 3
Depending upon the location of the ports you want to unconfigure, expand one of the following:
• Fixed Module
• Expansion Module
Step 4
Depending upon the type of port you want to unconfigure, expand one of the following:
• Appliance Ports
• FCoE Storage Ports
• Server Ports
• Storage FC Ports
• Uplink Ethernet Ports
• Uplink FC Ports
Step 5
Click the port or ports you want to unconfigure.
You can use the Shift key or Ctrl key to select multiple entries.
Step 6
Right-click the selected port or ports and choose Unconfigure node.
The port or ports are unconfigured, removed from the original node, and added to the Unconfigured Ports
node.
Appliance Ports
Appliance ports are only used to connect fabric interconnects to directly attached NFS storage.
Configuring an Appliance Port
You can configure Appliance ports on either the fixed module or an expansion module.
This task describes only one method of configuring appl ports. You can also configure appliance ports from
the General tab for the port.
Cisco UCS Manager GUI Configuration Guide, Release 2.0
OL-25712-04 89
Unconfiguring a Port on a Fabric Interconnect