Filter
Top Products
Enabling a Call Home Policy
Procedure
Step 1
In the Navigation pane, click the Admin tab.
Step 2
On the Admin tab, expand All > Communication Management > Call Home.
Step 3
In the Work pane, click the Policies tab.
Step 4
Click the policy that you want to enable and choose Show Navigator.
Step 5
In the State field, click Enabled.
Step 6
Click OK.
Deleting a Call Home Policy
Procedure
Step 1
In the Navigation pane, click the Admin tab.
Step 2
On the Admin tab, expand All > Communication Management > Call Home.
Step 3
In the Work pane, click the Policies tab.
Step 4
Right-click the policy that you want to disable and choose Delete.
Step 5
Click Save Changes.
Example: Configuring Call Home for Smart Call Home
Configuring Smart Call Home
Procedure
Step 1
In the Navigation pane, click the Admin tab.
Step 2
On the Admin tab, expand All > Communication Management > Call Home.
Step 3
In the Work pane, click the General tab.
Step 4
In the Admin area, do the following to enable Call Home:
a) In the State field, click on.
If this field is set to On, Cisco UCS Manager GUI displays the rest of the fields on this
tab.
Note
b) From the Switch Priority drop-down list, select one of the following urgency levels:
Cisco UCS Manager GUI Configuration Guide, Release 2.0
690 OL-25712-04
Example: Configuring Call Home for Smart Call Home