Filter
Top Products
The following syntax example shows how to specify multiples user roles and locales if you choose to
create the cisco-avpair attribute: shell:roles="admin,aaa" shell:locales="L1,abc". Use a comma
"," as the delimiter to separate multiple values.
• For a cluster configuration, add the management port IP addresses for both fabric interconnects. This
configuration ensures that remote users can continue to log in if the first fabric interconnect fails and
the system fails over to the second fabric interconnect. All login requests are sourced from these IP
addresses, not the virtual IP address used by Cisco UCS Manager.
Procedure
Step 1
In the Navigation pane, click the Admin tab.
Step 2
On the Admin tab, expand All > User Management > RADIUS.
Step 3
In the Create RADIUS Provider dialog box:
a) Complete the fields with the information about the RADIUS service you want to use.
DescriptionName
The hostname or IP address on which the RADIUS provider resides.
If you use a hostname rather than an IP address, you must
configure a DNS server in Cisco UCS Manager.
Note
Hostname field
The order in which Cisco UCS uses this provider to authenticate
users.
Enter an integer between 1 and 16, or enter lowest-available or 0
(zero) if you want Cisco UCS to assign the next available order based
on the other providers defined in this Cisco UCS domain.
Order field
The SSL encryption key for the database.Key field
The SSL encryption key repeated for confirmation purposes.Confirm Key field
The port through which Cisco UCS communicates with the RADIUS
database.
Authorization Port field
The length of time in seconds the system should spend trying to
contact the RADIUS database before it times out.
Enter an integer from 1 to 60 seconds, or enter 0 (zero) to use the
global timeout value specified on the RADIUS General tab. The
default is 5 seconds.
Timeout field
The number of times to retry the connection before the request is
considered to have failed.
If desired, enter an integer between 0 and 5. If you do not specify a
value, Cisco UCS uses the value specified on the RADIUS General
tab.
Retries field
Cisco UCS Manager GUI Configuration Guide, Release 2.0
OL-25712-04 143
Configuring RADIUS Providers